It is quite normal to face this situation. SD card or Secure Digital is a proprietary non-volatile memory card format. It is a type of removable memory card used in most electronic devices like cameras, smart devices, Televisions, MP3 players, and more. Although SD cards decrease with each passing day, many users still rely on SD cards to store or transfer their files between devices Often, our SD card gets corrupt or damaged, and there are many reasons behind this. However, it is also possible to fix the SD card, which cannot be read.
Your computer does not detect SD card may mean that your SD is corrupted and needs to be fixed. Before we get onto how to fix the SD card or memory card not showing up on Windows 7/8/10, we will examine why the SD card is not recognized on these Windows. Read and follow the steps below.
Step 1. Why is the SD card not recognized on Windows 7/8/10?
As mentioned earlier, every solution brings along a few other problems. In the case of SD cards or memory cards, the problem is that you are often bound to find your card unread by your computer. While the reason might not always be the same, if the problem persists, it is said to be that your SD card or memory card is corrupted.
Why your SD card might not be responding even after being connected to a computer? In certain cases, the problem might be logical damage or physical damage.
However, fixing is the second stage. The primary stage is to fully understand the reason behind why your SD card is not showing up on Windows 7, Windows 8, or Windows 10. Determining the reason will help you better get to the crux of the problem.
Here are several main reasons that could be behind your Windows not recognizing your SD card:
1. Connection Issue
A lot many times, there is an issue of connection. This connection issue can be due to a damaged card reader, adaptor, or a damaged USB port. The problem might not be in the SD card but in any of the connection points, which leads to you not seeing the Card’s files.
2. SD Card Is Locked
There is a little trigger kind of a thing at the side of your SD card. Sometimes, while handling the card, the trigger gets turned on. Thus, rendering the SD card as ‘write protected.’ If the SD card has turned to a write-protected feature, it will not be read or detected anywhere. Check your card for the same.
3. Improper Operation
While the hotplug is supported by most SD cards now, consistent and frequent operation of the same might lead to a corrupt file system or metal wires. A hotplug means that you can remove or insert your card from your device even while running.
4. Driver Letter Is Lost
Without a driver letter, a partition cannot be accessed in Windows Explorer. In case your SD has lost its driver letter, it will not be displayed in the system.
5. Corrupted Driver
If your SD card can be seen with a yellow mark in the Device Manager but is not showing up in the system, then it can be concluded that there is something wrong with the SD card’s drivers. Under such circumstances, your SD card cannot be seen in Windows File Explorer but Disk Management.
6. Partition Loss
Another common phenomenon is that your SD card’s partition gets deleted. This will leave your SD card full of unallocated space.
Learn more about How to Mount SD Card as Permanent Storage on Windows.
7. The SD Card is Physically Damaged
In terms of physical damage, your SD card could have been dropped into water, or you might see the plastic shell as damaged. In such cases, it becomes difficult even to get the card inside the reader.
Read Also : How to Read WhatsApp Deleted Messages
Step 2. How can we fix the SD card or memory card not detected on Windows?
Here are 8 solutions to fix your SD card if your Windows 7, Windows 8, or Windows 10 computer is not detecting or recognizing it.
1. Use A Different USB Port
While we always tend to blame the SD card for not working, the problem might be lying somewhere else altogether. Many computers have more than just one USB port, and to find out about yours, you can check the computer’s I/O. in case your computer happens to have more than one, then try plugging in your card through the other one and see if it works from that one or not. In case your card works well on the other one, then the problem is not with the card, but rather with the computer.
2. Test SD Card On Another PC Or A New Card Reader
Sometimes, the problem might lie in your computer, thus rendering your SD card unreadable. Under such circumstances, you can resort to testing your SD card on another PC. You can take any other PC and try on its various USB ports.
Also, you can try a different card reader, preferably a new one.
3. Turn Off Write Protection
You might be able to see your SD card on your computer, but you might not be able to modify it or make changes to it. If the situation persists, then you might have turned on write protection.
SD cards have a tiny switch kind of thing at their sides. You might have unknowingly turned on the switch, which is for write-only protection.
If your SD card does not have a switch and still happens to be write-protected, then follow the following steps:
- Step 1: Access Device management.
- Step 2: Press Windows key + R. This will launch Run Window.
- Step 3: Type devmgmt.msc in the given box & click OK button.
- Step 4: Locate & expand the ‘Disk Drivers’ option.
- Step 5: Find your SD card.
- Step 6: Right-click on your card & choose ‘Properties’.
- Step 7: Under ‘General Tab’ or ‘Policy Tab,’ you will find an option related to writing policy. Turn the tab off & click OK.
4. Change The Drive Letter Of Unrecognizable SD Card
Your SD card will not show up in your computer system unless it has a drive letter. If you see a message that says ‘please insert a disk into removable disk’ even if your card reader has been assigned a drive letter, your card might be unreadable.
Here are the steps which can be followed to solve the problem:
- Step 1: Right-click on the ‘Start’ button & select ‘Disk Management’ from the menu.
- Step 2: Find your SD card there. Right-click on it & choose ‘Change Drive Letter and Paths’ from the drop-down menu.
- Step 3: Click the ‘Change’ button & choose a drive letter from the list.
- Step 4: Click on the OK button.
In case your SD card is missing a drive letter, click on the ‘Add’ button.
5. Run CHKDSK To Make The SD Card Detectable
You can follow the following steps to run CHKDSK to make the SD card detectable:
- Step 1: Right-click on ‘My Computer’ & select ‘Manage’.
- Step 2: Click on ‘Disk Management.’
- Step 3: Press Windows + R keys and type cmd. Hit the ‘Enter’ button.
- Step 4: Type chkdsk D: / f and press ‘Enter.’
You do not have to have any technical knowledge to carry out this fix.
6. Update The SD Card Driver
If you see a yellow sign beside the card reader (on going to Device Manager), your SD card issues play driver issues.
Here is how you can update the SD card driver:
- Step 1: Connect your SD to your computer.
- Step 2: Carry out the following. Control Panel > System > Device Manager > Disk Drivers.
- Step 3: Find your SD card. Right-click and ‘Uninstall.’
- Step 4: Choose ‘Scan for hardware changes’. This will refresh the drivers.
7. Force SD To Show Up From Virus Or Malware
Your SD card is often attacked by a virus or encrypted by malware, which can even hide your SD card from showing up. Follow these steps to run and clean software from virus or malware:
- Step 1: Plug in your SD card.
- Step 2: Go to ‘Start’ menu > type cmd in search bar > hit enter.
- Step 3: Click on cmd. Exe under the programs list.
- Step 4: Right-click on cmd. Exe.
- Step 5: To recover files, type attrib –h –r –s /s /d drive letter:\*.*
8. Format SD Card
If nothing seems to work for you, then the last resort is to format your SD card.
Here are the steps you can follow to format your SD card on your computer:
- Step 1: Press Windows + D on your computer to open Desktop View.
- Step 2: Press Windows + E to open ‘Computer’.
- Step 3: ‘Devices with removable storage’ will display your SD card.
- Step 4: Right-click & select ‘Format’.
- Step 5: Quick format > Start.
Step 3. How to recover and repair data from a corrupted SD Card?
Recoverit Data Recovery is dominant and effective data recovery software. It helps you get back all your valuable data such as audio files, photos, documents, videos, and, emails quickly and easily from a recycle bin, laptop, external storage devices, internal hard drive, and even a crashed computer. Another unbelievable aspect of Recoverit Data recovery Software is to help you recover even a fragmented video and repair a corrupt/damaged/broken video.Download | MacDownload | Win
Here are the steps you can follow closely:
Step 1: Select a location from where you want to start recovering your lost files.
Step 2: Scan the location for all the deleted files. You can select multiple files at once.
Step 3: Preview the file/files that have been scanned. Once you preview your file/files and are satisfied, click on the recover tab.
Introduction to Advanced Video Recovery function of Recoverit
Video files are different from any other type of data. Sometimes, you might find your video acting funny. It might seem broken or corrupt.
Recoverit Data Recovery supports the Advanced Video Recovery feature. This feature helps to scan, gather and match the fragments of your corrupt videos, thus ensuring that most of your videos are recovered from Digital cameras, DSLR, Action Cameras, Drones, Dashcams, SD cards, camcorders, computer, etc.
Here are some of the key features of the Advanced Video Recovery feature of Recoverit:
- Scan and match your video fragments.
- Merge the fragments from the same video.
- Recover your videos and keep 95% of them intact.
- Recover unlimited video files without corruption.
Just click the Advanced Video Recovery option to recover the fragmented video files easily.
Steps to Repair Corrupted Video with Recoverit
Recoverit’s Video Repair is powerful, efficient, and effective video repair software that aids in repairing corrupt, broken, or damaged MOV, MP4, M2TS, MKV, MTS, 3GP, AVI, and FLV file formats.
It supports two repair modes:
- Quick repair: to repair various video errors.
- Advance repair: to repair your corrupt videos by analyzing the sample video shot’s data and technology shot by the same device.
Benefits of using Recoverit’s Advanced Video Repair feature:
- Repair multiple formats of videos simultaneously.
- Free scan for corrupt videos and preview repaired videos before saving them.
- No limitations on the size of video files for repair
- Repair any number of corrupt Video files.
Follow these steps for a smooth repair video process:
Step 1. Add your corrupted videos
Launch the application on your computer. To repair your corrupted video files, you can add them by clicking the Add button or “Add video and start repairing” area.
Step 2. Repair your videos
As soon as you have added all the corrupted videos, click on the Repair option to start the video repair process.
Step 3. Preview the videos
It will take some time to repair and once it has finished the repair process, a reminder showing info of successful fix will pop up on the screen. Press OK to close the operation.
Step 4. Advance mode for severely corrupted video (optional)
If the videos are severely corrupted and not repaired successfully, please go to the advanced repair mode. Just click the Advanced Repair button.
Then add a sample video and repair it now.
Step 5. Save repaired video
The advanced repair will perform the repairing process and prompt a success message when the process is completely done. Now, you can play these videos and you will not see any error on the screen.
I hope this article helped you! Please share it with your friends also.